1·Baseplate frames are to be calculated to support equipment from its lifting lugs with a maximum bending deflection of 1/1000 span.
应计算底座，保证从设备吊耳处支撑设备的最大弯曲挠度为1/1000跨度。
2·In this paper, the study of disc spring is simplified and regarded as the symmetrical bending of circular plate with initial bending deflection.
本文将碟形弹簧简化为具有初挠度的圆环形薄板的对称弯曲问题。
3·Heavy bamboo slats has wood board quality, transcend wood toughness, in density equal circumstances, any has not reached bamboo wood bending deflection.
竹板具有木板材的品质，超越木材的韧性，在密度相等的情况下，任何木材都无达到竹材具有的弯曲挠度。
4·Various continual beams are used in engineering. The calculation of bending deflection is always required in analyzing stiffness of the continual beams.
工程实际中，常采用各种形式的连续梁，对连续梁进行刚度分析时，需要计算其弯曲变形。
5·Geometricshape and energetic parameters of H-beam are tested for different bending deflection. Theresults of test show that theoretical and simulation analysis is correct.
测试了不同压下挠度矫直时H型钢的几何形态和主要力能参数，进一步证明了理论分析和仿真结果的正确性。
6·For the two-bar robot arm, we focus merely the whole kinetic energy at horizontal condition, and neglect the change of potential energy due to the bending deflection of the robot arm.
对二连杆机器人手臂在水平状态下仅考虑总的动能，而忽略由于手臂挠曲变形而产生的位能变化。
7·According to theoretic analysis, computing the bending deflection of every roller is enabled to ignore the effect of the web and only allow to the rectangular section made up of flange plates.
理论分析认为求解各可调辊的压下挠度时，可以不考虑腹板的影响而按翼缘组成的“矩形”断面来进行。
8·In this paper, an appropriate FEM model is established. The bending deflection is simulated by ANSYS when the web is considered and not considered. The correctness of the theoretic result is ve...
通过建立适当的有限元模型，运用A NSYS软件仿真了考虑腹板和不考虑腹板的情况，从而验证了理论结果的正确性。
9·Aimed at the bend of poplar-straw laminated beam, the theory of delamination shearing deformation was used to analyse its bending deflection and strength, and compared the results with other theories.
针对杨木—秸秆层合梁的弯曲问题，利用分层剪切理论对其变形和强度进行了分析。并将分析结果与经典理论、一阶和高阶剪切变形理论的结果进行了比较。
10·The three-magnet bending system is suitable for linac beam deflection of free-electron-laser facility.
这种结构紧凑的三磁铁偏转系统适用于自由电子激光器的束流传输。